A1RacingClub.com Forum
A1RacingClub.com Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Technical
 Truggies & Monster Trucks
 Hyper st
 New Topic  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

griffter
New Member

United Kingdom
1 Posts

Posted - 18 August 2008 :  15:56:19  Show Profile
Hi all i am a new comer, Have been up to the track a few times with my cousin, (the two big lads) Have had my hyper st for just over a week, i have broken two pull starts and am on my third, have been running it in on 16% fuel, which i have just changed to 25%, i just have no idea on how to set it up, have joined numerous forums and read so many different ways to do things and it all seems like mumbo jumbo to me. My main problem`s are that when i start the car it just buggers off on its own, cant seem to get it to idle without the wheels turning,(have not driven the car whith the shell on,wont stay still long enough)and the other problem being that when i turn the wheel on the hand controller the throttle and brake servo moves, this might not be a problem, they might all do this but as i am new i am not to sure. thanks for any help in advance.

grasshopper
Senior Member

1652 Posts

Posted - 18 August 2008 :  17:21:07  Show Profile
Rather than go through a list of possibles, might I suggest you bring it all down to the track and ask someone for some help - if that person can't help, they will point you in the direction of someone that will. Don't feel embarassed, we all started in the same way and everyone's always ready to show off their knowledge to newbies!

It might be a case of reading the instructions carefully, you know how people rush into things when it's new and just skim over the pages.
Or if it's a 'ready to run' - you've assumed it was built correctly and it isn't. It's always easier to show someone rather than tell them - just turn up with it and it'll get sorted.
Go to Top of Page

pfleety
New Member

United Kingdom
89 Posts

Posted - 19 August 2008 :  02:27:32  Show Profile  Click to see pfleety's MSN Messenger address
quote:
Originally posted by griffter

when i turn the wheel on the hand controller the throttle and brake servo moves


in the reciever are the correct connector in the correct channel slots? on mine chn2 id brake throttle chn 1 steering

hope this helps!
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Topic Locked
 Printer Friendly
Jump To:
A1RacingClub.com Forum © 2008 A1RacingClub.com Go To Top Of Page
This page was generated in 0.59 seconds. Snitz Forums 2000