I bought an LRP .28 with a pullstart fitted to go in the Hyper St I recently bought. However the engine won't fit on the engine mounts as the pull start casing catches on the chassis.
Can you get taller engine mounts or should I try to source a blank end plate? Or am I missing something???
I have found one It's a Sportwerks from Bolton Model Mart.
Good job as I cooked the axe rossi Mamba last week after getting some dirt in the carb, it was over 400 deg!!! No compression now so needs a pinch or new piston and liner.
Had an hour at the track this afternoon making sure it ran ok.
Topic Locked
Posted - 13 July 2009 : 18:14:26
