A1RacingClub.com Forum
A1RacingClub.com Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Technical
 Short Course Trucks
 reedy motor and associated speed controller
 New Topic  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

hpi_guy
Junior Member

United Kingdom
401 Posts

Posted - 27 October 2011 :  11:31:13  Show Profile
hi guys

i came and raced this tuesday and had a great time, i have just purchased a 10turn brushless reedy motor and a team associated rc10 t4.1 xp sc450 esc, any thoughts on this combination? it would be fitted into my blitz

grasshopper
Senior Member

1652 Posts

Posted - 27 October 2011 :  16:33:30  Show Profile
Ummm yep! loads of thoughts - but mostly - stick it in and see what happens...

Is it an upgrade for a RTR brushed set-up? if so the speed should be a little better, keep the same gearing as your previous motor/esc combo to compare difference then make changes afterwards.
Efficency should be higher so you should get better run times from the same battery pack - if you are running Li-po's make sure the low voltage cut-off facility is set on your speed controller failure to do this could damage your battery pack.
Go to Top of Page

hpi_guy
Junior Member

United Kingdom
401 Posts

Posted - 27 October 2011 :  16:43:31  Show Profile
Cheers, if I being it along will someone be able to help set it up?
Go to Top of Page

grasshopper
Senior Member

1652 Posts

Posted - 28 October 2011 :  00:11:07  Show Profile
One assumes that you have all the instructions for said ESC? - makes it easier if you do.
If not google it and see if you can find the relevant info on t'web, print and bring along...
Go to Top of Page

hpi_guy
Junior Member

United Kingdom
401 Posts

Posted - 28 October 2011 :  10:06:48  Show Profile
Yea, it should come with it
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Topic Locked
 Printer Friendly
Jump To:
A1RacingClub.com Forum © 2008 A1RacingClub.com Go To Top Of Page
This page was generated in 0.61 seconds. Snitz Forums 2000