I have the Etronix Pulse (Core-RC CR151 CODE 2.4Ghz) system and am having trouble with loosing the signal. I think it is the Rx but for the £25 to replace it and then discover it is not that! I could get the FrSky conversion with an extra Rx. Does any body know if it can be used with the Pulse (Code) radio? I posted a question on the Hobby King website and got this reply..... I would recommend you check on your radio first, the main thing it needs is a PPM and power signal heading to a transmitting module. This is within the radio as three wires, but check your radio has ppm first. However this module hasn't given me any interference troubles and so far, plenty of range. All it needs is to be mounted and connected. Works great. How would I know which is the PPM wire? Thanks Ian
Check your antenna wire and inside reciever case on Code, if there are smallest of nicks in insulation before proper exposed antenna wire at far end from reciever you will get problems with signal, control is iffy... especially steering and fail safe kicks in 2 seconds after car launches off flat out!.... i had it with both recievers as they got battle scarred in use...
Phil has the right wire and does a perfect repair, did mine a few times... will save you messing about if its that ; )
Topic Locked
Posted - 07 June 2012 : 06:19:08
