| Author |
 Topic  |
|
davecorah
Junior Member
United Kingdom
342 Posts |
 Posted - 16 May 2011 : 19:25:53
|
| yeah they are |
 |
|
|
Bullet
Junior Member
United Kingdom
154 Posts |
Posted - 16 May 2011 : 19:27:47
|
what adaptor are they?
plus final Q are you taking the steering and throttle servo's out? |
|
|
|
frecklychimp
Average Member
852 Posts |
Posted - 16 May 2011 : 19:30:00
|
Dave i'll sort you a price tomorrow,
looking at similar to what you want for the hyper tbh, in fact i would have done a swap but Jake is keen to have nitro... would have made a good 1/8th electric car to try to launch that class. |
|
|
|
davecorah
Junior Member
United Kingdom
342 Posts |
Posted - 16 May 2011 : 19:31:34
|
| they use tamiya adapters at the minute, il take the steering servo out but will leave the throttle one in, you could put the throttle servo in the steering slot as its a very strong savox metal gear one (savox 0252mg) i think ther is a basic servo in the spares too, i have dug out the brushed motors you needed too will bring them tomorrow |
|
|
|
Bullet
Junior Member
United Kingdom
154 Posts |
Posted - 16 May 2011 : 19:34:38
|
| thanks are the steering servo's hard to install cause if there's a spare i might as well put it in. |
|
|
|
davecorah
Junior Member
United Kingdom
342 Posts |
Posted - 16 May 2011 : 19:38:13
|
| nope very easy, id put the current throttle servo in the steering and put the spare on the throttle as you want the better servo to do the steering |
|
|
|
Bullet
Junior Member
United Kingdom
154 Posts |
Posted - 16 May 2011 : 19:38:22
|
or would you sell the steering servo extra.
thanks |
|
|
|
davecorah
Junior Member
United Kingdom
342 Posts |
Posted - 16 May 2011 : 19:44:06
|
| steering servo is now in my short course and it would be about £50 if i sold it, best to look online for servos that are high torque and quite fast, the one i had in was a savox 1258tg which runs 12kg torque and 0.08 seconds speed, the servo which is currently in the throttle position has 10.5 kg torque and 0.19 speed which is plenty for steering, for a throttle servo you need to worry more about torque than speed |
|
|
|
Bullet
Junior Member
United Kingdom
154 Posts |
Posted - 16 May 2011 : 19:45:09
|
| would the throttle be good enough for racing. |
|
|
|
davecorah
Junior Member
United Kingdom
342 Posts |
Posted - 16 May 2011 : 19:47:03
|
| should be yeah, will talk you through it all tomorrow night if you like |
|
|
|
Bullet
Junior Member
United Kingdom
154 Posts |
Posted - 16 May 2011 : 19:59:37
|
ye cheers.
is it useable 2moz or iz there no reciever in it? |
|
|
|
davecorah
Junior Member
United Kingdom
342 Posts |
Posted - 16 May 2011 : 20:06:13
|
no reciever but if you took the one out of your current nitro it would only take a minute to get it useable
il swap the servos over for you tonight so its ready |
|
|
|
Bullet
Junior Member
United Kingdom
154 Posts |
Posted - 16 May 2011 : 20:35:28
|
| cheers |
|
|
|
Topic |
|
Topic Locked
