A1RacingClub.com Forum
A1RacingClub.com Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Technical
 Truggies & Monster Trucks
 New engine for my hyper st
 New Topic  Topic Locked
 Printer Friendly
Author Previous Topic Topic   

integrale1
Junior Member

Madagascar
410 Posts

Posted - 30 April 2007 :  21:29:38  Show Profile
Has anybody got any engine mounts for this engine to fit a hyper st,i wanted something witha bit more grunt than a .21/.28,might have a bit of trouble getting the hyper clutch to fit but i will give it a go








grasshopper
Senior Member

1652 Posts

Posted - 30 April 2007 :  21:40:41  Show Profile
I've got some Meccano strips that you can modify and then fit a layshaft with the right pulleys, couple of O rings as drive belts and you can fit the clutch to that - easy peasy.. how mush run time will you get from a 175cc tank?
Go to Top of Page

integrale1
Junior Member

Madagascar
410 Posts

Posted - 30 April 2007 :  21:46:20  Show Profile
With the first test i got about one second run time i think 25% nitro is a bit tame and its running a bit rich,the other problem is fitting it to my starter box it overhangs a bit and its making my 12volt smoke
Go to Top of Page

integrale1
Junior Member

Madagascar
410 Posts

Posted - 30 April 2007 :  21:52:08  Show Profile
Ive got a new member for my pitcrew aswell for tuesday,quite good at getting my mixture right





just ask if you want to borrow her...
Go to Top of Page

buggyrunner
Average Member

United Kingdom
526 Posts

Posted - 30 April 2007 :  21:54:09  Show Profile  Click to see buggyrunner's MSN Messenger address
whats her name Mark?

Edited by - buggyrunner on 30 April 2007 21:54:52
Go to Top of Page

integrale1
Junior Member

Madagascar
410 Posts

Posted - 30 April 2007 :  21:54:59  Show Profile
Actually its trevor
Go to Top of Page

casbuster
Junior Member

United Kingdom
174 Posts

Posted - 02 May 2007 :  21:24:52  Show Profile  Click to see casbuster's MSN Messenger address  Send casbuster a Yahoo! Message
After i blow my ws7/3 on thuesday i have ordered a new engine for my hong nor a ninja 28 should arrive thursday and hopefully i will get it un in by tuesday and imight get round the track this time lol.
Go to Top of Page

integrale1
Junior Member

Madagascar
410 Posts

Posted - 03 May 2007 :  17:25:29  Show Profile
Ive picked up an rb worlds 2 for my st,after i cooked my hyper21 on tuesday night
Go to Top of Page

buggyrunner
Average Member

United Kingdom
526 Posts

Posted - 03 May 2007 :  18:06:15  Show Profile  Click to see buggyrunner's MSN Messenger address
Was your hyper21 engine very old?
Go to Top of Page

integrale1
Junior Member

Madagascar
410 Posts

Posted - 04 May 2007 :  16:15:47  Show Profile
No it was quite new,hasnt done any harm its still got bags of compresion,it only ran hot for a very short time...
Go to Top of Page

ianholt
Average Member

United Kingdom
750 Posts

Posted - 05 May 2007 :  19:37:56  Show Profile
A warning to everybody, DONT BUY A HYPER .21 ENGINE OFF E-BAY ANY TIME SOON! you dont know where it has come from.
Go to Top of Page

integrale1
Junior Member

Madagascar
410 Posts

Posted - 05 May 2007 :  20:33:47  Show Profile
One carefull owner has had no use what so ever,allways used after run oil....you know you want it...
Go to Top of Page

buggyrunner
Average Member

United Kingdom
526 Posts

Posted - 05 May 2007 :  20:37:00  Show Profile  Click to see buggyrunner's MSN Messenger address
Thats why you cooked it your suppose to run them on nitro fuel
Go to Top of Page
  Previous Topic Topic   
 New Topic  Topic Locked
 Printer Friendly
Jump To:
A1RacingClub.com Forum © 2008 A1RacingClub.com Go To Top Of Page
This page was generated in 0.59 seconds. Snitz Forums 2000